Gaskets AC Ryan
Here you can compare the prices for gaskets AC Ryan, get acquainted with photos and technical characteristics (for example Quality, Sockets quantity, Diameter, Depth, Length, Colour of product) and buy a liked model gaskets in one of the reliable online stores.
-
Product catalogs to browse
-
Toolx™ Pin Remover - ATX / P4-12V
For removing ATX pins (ATX20pin / ATX24pin) & P4-12V 4pins from the the connectors.
Without a pin remover, you would have to cut off the wires and re-solder the pins to change the connectors. With the Toolx™ Pin Remover, you can just remove the pins with the wire and re insert them into the new connectors.
Note:
For the ATX / P4-12V pins, you need about 5min (less if you're lucky) to get the hang of removing your first pin. Once you "got it", the 2nd, 3rd, 4th pins are a breeze and soon you can even them blindfolded! :-)
Seriously ATX / p4-12V pins, they ARE tough to get out. They were NOT designed to be removed. Look at it this way, without our Toolx™ Pin Remover, it is IMPOSSIBLE to remove. Use our pin remover, it's a little tough ONLY for the first time. And after that you can even show off to others your newly acquired skill !!!! :-)
Need a little tip on how to use the Pin Remover for ATX / P4-12V? Drop us an email : toolx@acryan.com
Note:
This Toolx™ Pin Remover for ATX is designed with 2 FlexTip™. You can bedn them easily to the exact width of the pins, but they will be strong enough to push into the connectors. The FlexTips™ do NOT break easily so no worries there. If your FlexTips™ are bent, simply bent them back. :-) Flexxxxxxible!
Without a pin remover, you would have to cut off the wires and re-solder the pins to change the connectors. With the Toolx™ Pin Remover, you can just remove the pins with the wire and re insert them into the new connectors.
Note:
For the ATX / P4-12V pins, you need about 5min (less if you're lucky) to get the hang of removing your first pin. Once you "got it", the 2nd, 3rd, 4th pins are a breeze and soon you can even them blindfolded! :-)
Seriously ATX / p4-12V pins, they ARE tough to get out. They were NOT designed to be removed. Look at it this way, without our Toolx™ Pin Remover, it is IMPOSSIBLE to remove. Use our pin remover, it's a little tough ONLY for the first time. And after that you can even show off to others your newly acquired skill !!!! :-)
Need a little tip on how to use the Pin Remover for ATX / P4-12V? Drop us an email : toolx@acryan.com
Note:
This Toolx™ Pin Remover for ATX is designed with 2 FlexTip™. You can bedn them easily to the exact width of the pins, but they will be strong enough to push into the connectors. The FlexTips™ do NOT break easily so no worries there. If your FlexTips™ are bent, simply bent them back. :-) Flexxxxxxible!
-
Payment Methods
We accept:
